Tag Archives: Architectural Design

Archetectural Design using Autodesk Inventor with iLogic and Revit

Easily Create 3D Models from Photographs with Autodesk’s Project Photofly

Posted on by

(BUSINESS WIRE)–Autodesk announces the availability of Project Photofly, a technology preview of a web service that allows users to easily create 3D models from photographs using the cloud. Project Photofly is currently available for free* on Autodesk Labs.

The Autodesk Project Photofly technology preview enables architecture, design, media & entertainment and manufacturing firms to easily create 3D models from a series of photographs.

Photofly breaks the barrier to entry to image-based modeling because of its automatic calibration process. The manual calibration of photographs enabled by other technologies is complex and requires a strong expertise to get a good result. Project Photofly utilizes an automatic calibration engine, called “Camera Factory,” which is made available as a web service through a Windows-based client called “Photo Scene Editor.” Customers connect to the Camera Factory through the Photo Scene Editor, and then use their favorite Autodesk 3D modeling software (AutoCAD, Autodesk Revit, Autodesk 3ds Max, etc.) to consume the data in DWG format to model on top of the images.

“Reality capture gives designers and engineers the ability to better measure, analyze, document and plan for projects.”

Continue reading →





BIM Models Via Reverse Engineering With Autodesk Inventor – Part 8

Posted on by

Most of the things that remain to be modeled to complete this project have been covered earlier, and are relatively easy – the four knobs on the front are the last challenge.

.

I’ll run through some of the procedures that weren’t covered earlier and get the rest of the stuff modeled in this post. If there is time, I’ll move right into the knobs to finish this up, otherwise, there’ll be one more post in this series.

On the side of the unit, there is some sort of hatch that will be represented in this model as a shallow groove in the surface, and a tapped drain hole –both of which are procedures covered earlier in this series, but there are differences that should be shown. To begin, I created a plane on the furthest right horizontal edge of the model (could also have been completely off the model).   Continue reading →

Pages: 1 2




BIM Models Via Reverse Engineering With Autodesk Inventor – Part 7

Posted on by

I’ll begin this post by going all the way back to the first extrusion in this model to fix an error I made way back then. It will go a long way to demonstrate the power of parametric modeling.

 

The problem was that during the first extrusion, I inadvertently included the profile of the front reinforcing ribs in the selection set, giving the entire lower front an angle that it should not have. To fix this mistake, all I did was double click on the offending extrusion, get the profile selector from the dialog, hold down the shift button on my keyboard, and select the profile I want to remove from the selection set…

Selecting a profile

Continue reading →

Pages: 1 2




BIM Models Via Reverse Engineering With Autodesk Inventor – Part 1

Posted on by

As anyone who has delved into the world of Digital Prototyping (also known as BIM) knows, most manufacturers are total slackers when it comes to providing models and information for their products.

Here is how things almost always go. You go to the manufacturers website looking for an accurate 3D model of the AG3 (Awesome Gizmo 3000), and you find out that the manufacturer has what looks like a scanned brochure as a website. Not a good sign.

So you look around and find that the site is nothing more than a “look how swell our products are” site with no real design information beyond a rough size and possibly a neat java color chooser. So you go to Google. Through a Google search you find a retailer who has at least gone through the trouble of  scanning  the installation instructions and putting them online …which is close to, but better than nothing in most cases.

In this, the information age ……not even an old-school set of AutoCAD 2D plans & elevations on most sites….jeeesh!

So there’s no Model……now what?

The Designer/Engineer has several choices:

  • Continue to waste time on what will likely turn out to be a wild goose chase
  • Look for a competitor that does have models of their products
  • Model the thing yourself with whatever info you can get

The second choice is by far the most palatable. If someone else makes a comparable item, and provides a model, go with them…… but unfortunately, the last choice will be the only option in many instances.  
Continue reading →





Introducing the Open Design Project’s New Eco Home Design Section!

Posted on by
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The ODP now uses the Multi-Site feature of WordPress to integrate multiple, separate blogs into one larger whole, and the first off-shoot, the Eco Home blog is now up & running. 

The new  format will allow people with disparate  design goals and styles to meet under a single roof, and hopefully share solutions to design problems. The main thrust will be wood related trades as they relate to ecologically sound home construction, outfitting, and maintenance … no different than it has been, just easier (I hope)  to accomplish.

I will also be splitting off  Woodworking into its own section sometime in the near future, and hope to have the integrated forum up & running shortly….which is one of my projects for today.

So if the site is a bit off-kilter in the coming days, it’s just me in the background screwing things up ;)  —but in the long-run, all will be well.

Look for my post on quickie reverse  engineering later today (if at all possible), its a fairly quick way to get models made when the manufacturer of a given item has no models (and usually not even 2D CAD drawings) available …and all you have to work with is a lame image with dimensions on it.  Until then, have a great day!

[Update: I dumped the multi site crap from wordpress as it totally sucked. there is a new site for home design, but it ia on an entirely different domain. Use this: The Craftsman Cottage]





The Mission Table Model Final: The Creation of the Assembly

Posted on by
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

There is some pretty slick stuff coming down the pike in this Inventor Tutorial series including web configured components and a eco starter home with a designed-in upgrade path.

.

But for now, back to the Mission Table. The skeletal stuff is now complete, and all that’s left is to make components of the whole mess (47 solids). The image to the right shows the outcome … but for now, we have what you see below…

 

 

Continue reading →