iLogic Tutorial – 02 – More Library Sketch Creation
Rename this sketch Grid, then turn off the dimension visibility, and save the part as Amana_Raised_Panel.ipt. You should have a grid/table like theone shown below….
The grid you have just created does absolutely nothing but organize the profiles to be created in the next step, but the neatness will be appreciated by everyone downstream who needs to use your library. Now, use the online drawings to create the Amana Raised Panel Profiles.
You will notice that some dimensions are missing. You will need to make them up with a best guess as I did. Hopefully in the next few years Amana, Eagle, Whiteside, or one of the many others will start puting real, acurate CAD info online –hopefully libraries such as this so that the user is not forced to do the work they should be doing. But enough ranting for now. On with the design…
The parts I found were numbered between 54115 and 54121 with 54120 missing for a total of six parts. To begin, create a new sketch on the same plane as the grid (XY), and enter the numbers as shown below…
When compleated, name this sketch Part Number Text and save.
- iLogic Tutorial for the Derived Block Library -
Intro – 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8 – 9 – 10 – 11 – 12 – 13
Subsribe to Post Notifications
Loading ...